Come With Iron Box RFID Card Access Control Board , One Door Single Way Controller , Installed 12V Switch Power
Features:
1. Over-current protection, over-voltage protection, and reversal protection for the power supply and all of the input and output terminals
2. Reliable network system of controllers using either TCP/IP or RS-485 Serial communication
3. Supports different Wiegand formats, and connects to GRANDING RFID readers.
4. Connects with a variety of electric locks, sensors, exit buttons, alarm devices, and indicators
5. Can be integrated with other security systems such as CCTV, Intrusion Detection, Fire Alarm Release, and elevastor Control for total security system. Directly compatible with biometric reader controllers.
6. System management by browser from client PC’s. No need to install software on each client
7. Programming of special logic between doors is set up with simple pull down menus. No special scripts or code is required.
8. Management software allows indication of real-time door status and remote commanding of door open/close state. Alarm conditions such as forced open and extended open alarms are reported.
9. Advanced access control capabilities are built into the hardware, including anti-passback, Dual and multi-Card Authentication, and Duress Mode.
Specifications:
| Model | C3-100 |
| CPU | 32bit MIPS CPU |
| RAM | 32M bits |
| Flash Memory | 256M bits |
| CARDS | 50,000 |
| Event Buffer | 200,000 |
| Power / Current | DC 9.6V-14.4V, Rated Max.1A |
| Reader Port | 2ea (26bit Wiegand, 8bit Burst for PIN) |
| Communication | RS485, TCP/IP |
| Baud Rate | 38,400bps (Recommended) / 9600bps, 19,200bps, 57,600bps (selectable) |
| Input Port | 2ea (Exit Button#1, Door Sensor#1) |
| Output Port | 1ea (1 FORM-C Relay Output, SPDT 5A@36VDC/8A@30VAC) 1ea (1 Aux FORM-C Relay Output, SPDT 2A@30VDC) |
| | |
| LED Indicator | Yes, LED indication for communication, power, status and punch card |
| Operating Temperature | 0°to +55°C |
| Operating Humidity | 10% to 80% relative humidity non-condensing |
| Dimension (L*W)mm | 160(W)*106(H)(single board ) 345(W)*275(H)*70(D)(with power supply and metal box) |
| Certification | CE, FCC |
Instruction:
c3-100 Access control Pannel is built on flexible, open technology to provide management, real-time monitoring , and control of your access control system-all from a browser, with no additional software to install. Our secure Web-hosted infrastructure and centralized online administration reduce your IT costs and allow you to easily manage all of your access points in a single location. C3-100's versatile design features take care of present and future needs with ease and efficiency. It is one of the most rugged and reliable controllers on the market, with a multitude of built-in features. The C3-100 can communicate at 38.4 Kbps via RS-485 configuration or Ethernet TCP/IP networks. It can store up to 30,000 cardholders. SDK (Software Development Kit) is available for the customer to integrate the controller into existing access control software or to develop new software.
Product Tags:
|
|
RFID TCP IP Single Door Access Control Board For Hospital , School Images
|
